Concordance for noun radius

The page lists top contexts for noun radius and their percentages (as applied to automotive subject domain).

Share	Phrase
20.25%	curvature radius
6.08%	turning [motion] radius
2.52%	have radius [perform operation]
2.04%	radius arm
1.89%	aerodynamic [physical/chemical] radius
1.66%	radius rod
1.44%	scrub radius
1.42%	effective [effectiveness] radius
1.33%	small [size] radius
1.27%	bisecting radius
1.24%	pitch radius
1.23%	mechanical [functioning] radius
1.16%	radius [is] radius
1.10%	large [size] radius
1.04%	radius turn
1.00%	constant [time periodicity] radius
0.94%	smaller radius
0.89%	minimum [size] radius
0.85%	mean [age] radius
0.83%	inch radius
0.82%	radius [is] radius
0.77%	larger radius
0.73%	greater than radius
0.72%	gyration radius
0.67%	inner [location] radius
0.66%	turn radius
0.65%	equal [similarity] radius
0.63%	smaller than radius
0.58%	radius reciprocal
0.58%	greater radius
0.57%	equal to radius
0.55%	different [similarity] radius
0.55%	shape with radius
0.55%	vehicle radius
0.54%	radius [is] mm
0.53%	mm radius
0.53%	wheel radius
0.52%	reduce radius [perform operation]
0.52%	circle radius
0.52%	radius center
0.49%	radius like groove
0.49%	radius than radius
0.49%	bend radius
0.49%	radius seal
0.47%	radius portion
0.47%	outer [location] radius
0.45%	radius [does] define
0.44%	radius [is] time
0.43%	radius range
0.40%	preselected [effectiveness] radius
0.39%	radius [is] inch
0.39%	turning [motion] radius
0.38%	neighborhood radius
0.37%	larger than radius
0.37%	radius from center
0.36%	radius ra
0.35%	surface radius
0.35%	radius [attribute] equal
0.35%	radius than radius
0.35%	radius curvature
0.35%	common [typicality] radius
0.34%	define radius [perform operation]
0.34%	leading [importance] radius
0.33%	radius bushing
0.33%	radius [is] effectively
0.32%	tire radius
0.31%	arc radius
0.29%	edge radius
0.29%	turn radius [perform operation]
0.29%	radius arc
0.28%	tighter radius
0.28%	less [degree] radius
0.28%	smallest radius
0.28%	increase radius [perform operation]
0.28%	radius [does] decrease
0.27%	less than radius
0.27%	less [size] radius
0.27%	radius radius
0.27%	rotor radius
0.25%	rolling radius
0.25%	largest [amount] radius
0.25%	millimeter radius
0.24%	cross [direction] radius
0.24%	infinite [amount] radius
0.24%	tight [tightness] radius
0.24%	radius [attribute] greater
0.24%	radius mower
0.23%	bore radius
0.23%	radius surface
0.23%	radius [does] increase
0.23%	radius rb
0.23%	cavity radius
0.23%	independent of radius
0.22%	pinion radius
0.22%	extend at radius
0.22%	portion radius
0.21%	cylinder radius
0.21%	radius radius
0.21%	radius [location] curve
0.21%	predetermined [representation] radius
0.21%	rotation radius
0.21%	disc radius
0.21%	uniform [similarity] radius
0.21%	piston radius
0.21%	zero radius
0.20%	end at radius
0.20%	toroidal [shape] radius
0.20%	radius [does] extend
0.20%	bounce radius
0.20%	radius rr
0.20%	inside [location] radius
0.19%	sector radius
0.19%	radius [attribute] smaller
0.19%	groove radius
0.19%	limit radius [perform operation]
0.18%	shorter radius
0.18%	parallel to radius
0.18%	approximate radius [perform operation]
0.18%	slot radius
0.18%	pulley radius
0.18%	belt radius
0.18%	radius direction
0.18%	relative to radius
0.17%	outside [location] radius
0.17%	post radius
0.17%	change radius [perform operation]
0.17%	rotating [motion] radius
0.16%	prescribed [certainty] radius
0.16%	short [size] radius
0.16%	select radius [perform operation]
0.16%	radius [location] measure
0.16%	radius mm
0.16%	decrease radius [perform operation]
0.16%	radius [using as instrument] form
0.16%	roller radius
0.16%	minimize radius [perform operation]
0.16%	radius [location] form
0.15%	represent radius [perform operation]
0.15%	enlarge radius [perform operation]
0.15%	radius curve
0.15%	sharp [shape] radius
0.15%	end radius
0.15%	disk radius
0.14%	radius extend
0.14%	radius have
0.14%	approximately radius
0.14%	steering [purpose] radius
0.13%	curve radius
0.13%	tractor radius
0.13%	maximum [size] radius
0.13%	control radius [perform operation]